Human Body Cavity Ntc Temperature Sensor for Medical Use

• Installation Type: Inserting
• Sensing Type: Resistive
• Contact: Contact
• Output Signal Type: Analog Type
• Production Process: Ceramics
• Material: Ceramics
• Model NO.: JP402
• Measuring Medium: Temperature
• IP Rating: IP64
• Certification: CE
• Customized: Customized
• Manufacturer: Jp Sensor
• Beta Value: Customized
• Resistance Value: Customized
• Function: Temperature Measurement
• Transport Package: Carton Packing
• Specification: gray
• Trademark: Jingpu Brand
• Origin: Hefei, Anhui, China
• HS Code: 9025191010
• Production Capacity: 50000PCS/M

Product Description

Brief Introduction

Medical body cavity temperature sensor (esophageal/rectal temperature probe) is used to measure body cavity temperature and monitor patients. The sensor consists of epoxy beads and a 2-pin aviation plug. We also accept custom plugs or connectors. Rated resistance 2.252kΩ or 10 kω. The measured temperature tolerance is within ±0.1ºC, compatible with the replacement of Mindray series sensors. Our medical products have passed CE certification.

 

Product Features:

Epoxy encapsulation
Reusability
Temperature tolerance
(25~45)ºC±0.1ºC 
Operating temperature range: 0ºC~50ºC

 

Product Application:

Suitable for medical monitoring equipment

 

Structure & Dimensions:

 

 

NO.	Name	Material Specification	QTY.	Remarks
1	Chip	NTC chip	1	/
2	Probe	Epoxy Resin	1	gray
3	Wire	24AWG/1C OD3.1 Shielded round sheath wire	1	gray
4	Plug	2 pin aviation plug	1	Gray+Yellow

Standard packing (inner packing): 1 pcs/polybag
 

Operation Notice:

1. Application: temperature measurement.

2. The current through the NTC is controlled within the Pmax range to avoid measurement errors caused by component self-heating.

3. To avoid overheating heat shock, blow the probe at least 30mm with hot air, in case heat shrink protection tubes need to be installed.

4. Storage temperature -10ºC~40ºC, ≤75%RH; Avoid exposure to corrosive gases and sunlight; After opening the package, it needs to be sealed again.

5. According to the structure of glass coated NTC therristor, in order to avoid excessive tension and bending force of the epoxy lead, the lead should be controlled at the bending point or force point on the lead 6mm or below the sealing head when the end user installs. To avoid damage to the chip, resulting in resistance drift or even open circuit, especially when the component is heated.