Reusable Temperature Probes with Single Thermistor Sterilized Ntc Thermistor

• Customization: Available
• Installation Type: Body Cavity
• Sensing Type: Resistive
• Model NO.: JP401
• Contact: Contact
• Output Signal Type: Analog Type
• Material: Resistive Lithium Chloride
• Measuring Medium: Temperature
• IP Rating: IP56
• Certification: CE
• Customized: Customized
• Wire Spec: Gray Cable
• Wire Length: 1.5meters or 3.0meters
• accessory: Temperature Adapter Cable
• Connector: Molex Connector 2pins
• Transport Package: Bulk Package
• Specification: metal disk 9.50mm, epoxy
• Trademark: JP
• Origin: Hefei, Anhui Province, China
• HS Code: 9025191010
• Production Capacity: 100000 PCS
• Package Size: 27.00cm * 18.00cm * 15.00cm
• Package Gross Weight: 2.000kg

Product Description

Reusable Temperature Probes with Single Thermistor Sterilized NTC thermistor
 

Product Description

The item is reusable temperature probes with single thermistor sterilized NTC thermistor. Medical human body cavity temperature sensor ( esophgeal/ rectal temperature probe) be used for human body cavity temperature measurement, Used for the patient monitors. The reusable temperature probes be composed of metal disk and Mono audio plug 6.3mm and round sheath gray wire cable. Meanwhile, we also accept the customized plug or connector. The rated resistance value 2.252kΩ or 10kΩ. The measured temperature tolerance within  ±0.1ºC, compatible for replacement YSI400 series sensor. It is one sterilized reusable temperature probes.

Product Features

Epoxy encapsulation
Reusability
Temperature tolerance:(25~45)ºC±0.1ºC
Operating temperature range: 0ºC~50ºC
Fast response time
Sterilization
Compatible for monitor

Application:
   Suitable for medical monitoring equipment

Structure and Dimensions:(Unit:mm)

NO.	Name	Material Specification	QTY.	Remarks
1	Chip	NTC	1	/
2	Probe	Epoxy Resin	1	gray
3	Wire	24AWG/1C OD3.1 Shielded round sheath wire	1	gray
4	Plug	6.3MP-φ6.3*31-50	1	gray

 

Packaging & Shipping

Standard packing (inner packing): 1 pcs/polybag

Operation Notice
 

1. Application:Temperature measure ;

 

1. The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.

 

1. Avoid excessive heat shock,The hot air blow shoul d beat least 30mm to the probe in case heat shrink protection tube need to be attached.

 

1. Storage Temperature 0ºC~50ºC,30%~80%RH;Avoid in a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.

5.According to the structure of Glass coating NTC thermistor, when end user install, to avoid the epoxy head subjected too much tensile force and bending force from the lead wire,The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head.So as not to hurt the chip, resulting in resistance drifting and even open circuit, esepcially when the component is heated.
 

Company Profile