| Customization: | Available |
|---|---|
| Resistance: | Sensitive Resistor |
| Installation: | Soldering |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The item is one bare-chip NTC Thermistor 6.65Kohm 105 degree C temperature sensor. It consists of NTC element, epoxy resin and electric wire.
It's used for temperature measurement. The thermistor sensor tip is coated with a tough epoxy seal that completely covers the NTC and lead-wire connection.
| Items | Specification | Test Method and condition |
| Resistance | R0=6.65KΩ (±1.5%) R25=2KΩ (±3.5%) |
R0: RESISTANCE AT 0ºC |
| B CONSTANT | B(0/25)= 3914K | |
| Heat Time Constant | 2±1 seconds | The thermistor is first immersed in water at 0ºC. when temperature of The thermistor reachs 0ºC. It is then immerse in water at 25ºC. The time taken for the thermistor to reach 15.8ºC is then measured. |
| Heat dissipation constant | 1.5mW/ºC | In static air at 25ºC |
| Max rated wattage | 82.5nW | In air at 25ºC |
| Allowable operating carrent | 0.8mA | In air at 25ºC, The current with in 2% of the resistance change according to the self-heating |
| Max allowable current | 6mA | In air at 25ºC |
| Insulation resistance | 100MΩ or above | DC 500V Megger |
| Operating temperature | -30ºC~80ºC | In air |
• Improved resistance to humidity
• Fast response.
• High measuring accuracy.
• Different tolerances available.
• Epoxy resin encapsulation.
• Insulated leads of silver-plated nickel wire, AWG30
• UL approval.
Options
Non-standard lead lengths.
){kind=link}