Brief Instruction:
MF5A-1( for UAV unmanned aerial vehicle)series epoxy coated NTC Thermistor be manufactured from Hefei Jingpu Sensor Technology Co.,Ltd. It's composed of Copper clad steel lead wire, soldered NTC chip and epoxy resin. The sensor features: simple, functional, high accuracy. The optional resistance value range from 0.3kΩ to 2000kΩ, and beta value range from 2500K to 4500K. These epoxy coated NTC Thermistors be widely apply for home appliances, automotive, medical equipment, power tool etc.
Features:
•Comply for ROHS standard
•R25=10KΩ±5%,B25/85=3435k±2%
•Operating temperature range: -40ºC~125ºC
•The thickness of the thin
Application:
• For UAV(unmanned aerial vehicle)
Structure and Dimensions:(unit:mm)
product picture:
Standard packing (inner packing): 500pcs/polybag
Operation Notice
1.Application:Temperature measure and control;
2.The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.
3.Avoid excessive heat shock,The hot air blow shoul d beat least 30mm to the probe in case heat shrink protection tube need to be attached.
4.Storage Temperature -10ºC~40ºC,≤75%RH;Avoid in a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.
5.According to the structure of Glass coating NTC thermistor, when end user install, to avoid the epoxy head subjected too much tensile force and bending force from the lead wire,The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head.So as not to hurt the chip, resulting in resistance drifting and even open circuit, esepcially when the component is heated.
Audited Supplier 
){kind=link}