| Resistance: | Sensitive Resistor |
|---|---|
| Function for Resistance: | Sampling Resistor |
| Installation: | DIP Resistor |
| Material: | Wire-wound Resistor |
| Packaging: | Throught Hole |
| Type: | Thermal Resistor |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier The item is one thermal sensor 50cm NTC 10K 1%. This specification will apply for Thermistor sensor assy I-COMP RA103F3977F L=500MM which has produced by Hefei Jingpu Sensor Technology Co.,Ltd. And delivery to any customers.
Type of thermistor: Thermistor 10KΩ±1%
Shape & Dimension
Refer as "Sheet 7/12"
2-3 Electrical Characteristics
| NO | ITEM | SPECIFICATION | |
| 1 | Characteristic of temperature&resistance | Temperature (ºC) | R/Value (kΩ) |
| 25ºC±0.1 | 10KΩ±1% | ||
| / | 85ºC±0.1 | 1.071KΩ±3.28% | |
| 2 | B Constant (25ºC/85ºC) | ||
| 3 | Insulation resistance | Over 100MΩ in DC 500V (Between contact part and L/Wire) | |
| 4 | Dissipation constant | 1~1.6 mW/ºC (min)in air | |
| 5 | Dielectric Strength | 1 Min in AC1500V/1sec in AC 1800V (Between contact part and L/wire) | |
The thermal Sensor 50cm NTC 10K 1% be packed by one carton.
| Item | Test condition | Inspection standard |
| Thermal shock test | 25±2ºC<-->100±2ºC (in water, 5 min, loaded=DC 5v), pull up resistor should be connected in series with thermistor judgment after 3,00 cycle, withstand voltage and insulation resistance should be satisfied | From initial value R=±3%, B=±2% Insulation resistance= more than 100MΩ withstand voltage= AC 1500V / 1 Min, AC 1800V / 1 Sec |
| Heat resistance | At 100±5ºC for 96 hours, and exposed at normal temp and humidity more than 1 hour | ↑ |
| Cold resistance | At -20±5ºC for 96 hours, and exposed at normal temp. and humidity more than 1 hour | ↑ |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}