Temperature sensor assembly NTC 10K 3950 1% consist of NTC thermistor, lead wire, cylinder terminal and closed end stainless steel tube temperature sensor probe.
|
Product name |
Temperature sensor assembly NTC 10K 3950 1% |
| Resistance value |
5-100 KΩ |
| Lead wire insulation |
PVC, PTFE, XLPE, Silicon latex Fiberglass |
| Temperature Measurement Range |
-20~105ºC/-40~150ºC/-40~250ºC |
| Beta value |
±1%~±10% |
| B value |
25/50=3950K or 3435K |
Product parameters
Size: 1- Meter / 3.28 ft.
Type: NTC 10K / B3950 1%
Temperature measurement range: -25ºC to +125ºC
Head size: 5*25mm / 0.2''*1'' (D*L)
Connector: 2 pin JST XH 2.54mm plug
Resistance: 10kohm
Advantages:
ROHS compliant
High stability and reliability
Suitable for high temperature, high humidity application
Small size, light weight, suitable for automatic plug-in installation and large scale production;
Wide resistance range;
Rapid respond, high sensitivity;
Interchangeability and consistency are good, cost-effective, economical and pratical
5PCS NTC 10K Ohm 1% 3435 Thermistor Temperature Sensor Cylinder Probe
Package & Shipping
Standard export packing: 10pcs/bag
Shipping terms: FOB/CIF/CNF terms
By sea or by air
Outer Package photo
Related temperature sensors
Application field
Temperature sensor assembly NTC 10K 3950 1%
Temperature measurement and control.
These can be used in temperature measurement and control of household air conditioners, car air conditioners, refrigerators, freezers, water heaters, water dispensers, dishwashers.
Package includes: 5X temperature control cables
What is a Temperature Sensor?
A simple temperature sensor is a device, to measure the temperature through an electrical signal it requires a thermocouple or RTD (Resistance Temperature Detectors). The thermocouple is prepared by two dissimilar metals. Which generate the electrical voltage indirectly proportional to change the temperature. The RTD is a variable resistor it will change the electrical resistance indirectly proportional to changes in the temperature in a precise, and nearly linear manner.
Can these thermistors be immersed in liquid?
Well the leads are bare, as pictured, so an electrically conductive liquid will short them unless you insulate them after soldering. It has no moving parts, so like all solid state electronics they can be immersed in non-electrically conductive liquids.
You can insulate solid state electronics easily with a thick enough coat of spray paint as well, to create a thin barrier to keep water out.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}