Ntc Thermistors, Mini Epoxy PVC Insulated Leads

• Resistance: Sensitive Resistor
• Function for Resistance: Protective Resistor
• Installation: DIP Resistor
• Material: Wire-wound Resistor
• Packaging: Soldering
• Type: Thermal Resistor
• Model NO.: MF5a-3
• Quantity: Duplex
• Shape: Button Shape
• Resistance change scale: Linear Scale
• Application: Audio
• Brand: Jingpu
• Transport Package: Netural Packing
• Specification: 3.0*10mm
• Trademark: Jingpu
• Origin: Hefei, Anhui, China
• HS Code: 8533400000
• Production Capacity: 100kpcs/Monthly

Product Description

NTC Thermistors, Mini Epoxy PVC Insulated Leads

NTC Thermistors, mini epoxy PVC insulated leads is made of NTC element, epoxy and two PVC lead legs. It's manufactured from Hefei Jingpu Sensor Technology Co.,Ltd.


 

QUICK REFERENCE DATA
PARAMETER	VALUE	UNIT
Resistance value at 25ºC	4.7K to 100K	Ω
Tolerance on R25-value	±1.0 to ±5.0	%
B25/85-value	3435 to 4190	K
Tolerance on B25/85	±0.5 to ±1.5	%
Operating temperature range at zero dissipation	-40 to 105	ºC
Maximum power dissipation at 55ºC	100	mW
Accuracy of temperature measurement (for 1% types)	±0.5 between 0 and 40 ±1.0 between -40 and 80	ºC
Dissipation factor (in still air)	3	mW/K
Response time (in oil)	2.5	s
Climatic category (LCT / UCT / days)	40 / 105 / 28
Minimum dielectric withstanding voltage between leads and coated body	500	V
Weight (40 mm length)	0.2	g

FEATURES
• High adhesive strength between the PVC wire and the encapsulating lacquer
• Accurate down to ±0.3ºC
• Small body of max. 3 mm for easy installation
• Material categorization:
  for definitions of compliance please see

APPLICATIONS
• Temperature measurement, sensing, and control
• On battery packs, heat-sinks, tubing, enclosures, etc.

DESCRIPTION
these sensors consist of small NTC chip soldered between stranded AWG #30, 105ºC resistant, PVC (UL2651), or PVC 105ºC single hook-up wires (acc. to UL1061). Terminations are solder dipped. They are lacquered and insulated with a black epoxy coating.


MARKING
Black lacquered body without additional mark

MOUNTING
By soldering the wire end, or crimping connector. The body can be inserted in a tube, free in air, tape attached or glued. Not intended for fluid immersed applications or continuous contact with water. Not for potting in hard material or over-molding applications. Consult Jingpu for specific application or mounting.

Related NTC thermistors from Jingpu


Note:the resistance. B value, wire and its length, colour, processing methods all can be customized.
After you confirm the product model, we will send you the samples and datasheet of this model.