NTC thermistor 10K 3435 1% consist of NTC thermistor, O ring lug temperature probe, electric wire, connector. It's used for surface temperature measurement.
|
Product name |
NTC thermistor for surface temperature measurement |
| Resistance value |
5-10 KΩ |
| Lead wire insulation |
PVC, PTFE, Silicon latex Fiberglass |
| Measuring Range |
-20~105ºC/-40~200ºC/ |
| resistance tolerance |
±1% |
| B value |
25/85=3435K |
Product parameters
R25 - 10K ohms, B value - 3435K
Wire is FEP - swg 24/7/32, wire length - 150mm
Ope. temp. range is -30C
Eye let tin plated brass with M3 hole.
Stripping and tinning wire length is 0.5mm
Optional metal shell
Product Advantages:
ROHS compliant
High stability and reliability
Suitable for high temperature, high humidity application
Small size, light weight, suitable for automatic plug-in installation and large scale production;
Wide resistance range;
Rapid respond, high sensitivity;
Interchangeability and consistency are good, cost-effective, economical and pratical
Package & Shipping
Standard export packing: 10pcs/bag
Shipping terms: FOB/CIF/CNF terms
By sea or by air
Package photo
Related temperature sensors
Application
1. Ntc temperature sensor widely use for wall-hanging stove;
2. Apply for solar water heater;
3. Ntc thermistor apply for air conditioner;
4. Ntc temperature sensor apply for refrigerator;
5. Ntc temperature sensor apply for HVAC system
Mounting:
Electrode must not be scratched before / during / after the mounting process.
Contact and housing used for assembly with thermistor have to be clean before mounting. Es-pecially grease or oil must be removed.
When NTC thermistors are encapsulated with sealing materials. the precautions given in chapter ''Mounting instructions''. ''Sealing and potting'' must be observed.
When the thermistor is mounted, there must not be any foreign body between the electrode of the thermistor and the clamping contact.
The minimum force and pressure of the clamping contact, pressing against the NTC must be 10N and 50Kpa.
respectively. In case the assembly is exposed to mechanical shock and / or vibration this force should be higher in order to avoid movement of the NTC during operation.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}