| Customization: | Available |
|---|---|
| Resistance: | Sensitive Resistor |
| Function for Resistance: | Protective Resistor, Temperature Measuring |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Thin film NTC thermistor sensor 50mm 25mm length is made of NTC chip, insulation film and lead wire. It is applied in units that requires fast response time, tight measuring space, and suitable for surface temperature measuring. It's widely used for temperature measurement in the BWM system.
| 3-1 | Rated zero-power resistance R25ºC | 10kΩ ±1% (at 25ºC) |
| 3-2 | B value *The B value is calculated using the zero-power resistance values measured at 25ºC and 85ºC |
3435K ±1% |
| 3-3 | Dissipation factor. | Approx. 0.7 mW/ºC (in air) |
| 3-4 | Thermal time constant | Approx 5.0s (in air) |
| 3-5 | Maximum power rating | 3.5mW (at 25ºC) |
| 3-6 | Category temperature range | -40~100ºC |
Climatic test
1) Dry Heat
After the test samples were exposed in air at 90±1ºC for 1,000 hours, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.
2) Damp heat
After the test samples were exposed in the humidity of 95% at 40 ±2ºC for 1,000 hours, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.
3) Cold
After the test samples were exposed in air at -30 ±1ºC for 1,000 hours, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.
4) Loading
After DC 1mA current was applied to the test samples in the temperature of 40 ±2ºC and the humidity of 95% for 1,000 hours, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.
5) Change of temperature
One cycle of the change of temperature shall be carried out in the order of the following conditions.
Room ambient temperature. (Initial value) At -25 ±3ºC, for 30 minutes.
Room ambient temperature, for 3 minutes.
After the 100 cycles of this process, the change ratio of the rated zero-power resistance shall be within ±1% of the initial value.
Packing: 500pcs /polybag
Package label: English version
R-T Table: R25=10kΩ±1%, B25/85=3435K±1%
){kind=link}