2.252kohm Medical Ntc Temperature Sensor for Temperature Measurement of Human Body Cavity

• Installation Type: Duct Type
• Sensing Type: Resistive
• Contact: Contact
• Output Signal Type: Analog Type
• Production Process: Integration
• Material: Ceramics
• Model NO.: JP401
• Measuring Medium: Temperature
• IP Rating: IP56
• Certification: CE
• Customized: Customized
• Operating Temperature Range: 0~50 Degree Celsius
• Tolerance: 0.1 Degree Celsius
• Chip: Ntc Chip
• Probe: Epoxy Resin
• Color: Gray
• Custom: Available
• Application: Temperature Measure
• Transport Package: Carton
• Specification: Length: 3000mm
• Trademark: JINGPU SENSOR
• Origin: Anhui, China
• HS Code: 9025191010
• Production Capacity: 100000pieces/Month

Product Description

2.252kohm Medical NTC Temperature Sensor For Temperature Measurement of Human Body Cavity  

Brief Introduction:
Medical human body cavity temperature sensor ( esophageal/ rectal temperature probe) be used for human body cavity temperature measurement, Used for the patient monitors. The sensor is composed of epoxy bead and Mono audio plug 6.3mm. Meanwhile, we also accept customized plug or connector. The rated resistance value is 2.252kΩ or 10kΩ. The measured temperature tolerance within (25~45)ºC ±0.1ºC, and it is compatible for replacement YSI400 series sensor.

Features:
Epoxy encapsulation
Reusability
Temperature tolerance
(25~45)ºC±0.1ºC
Operating temperature range: 0ºC~50ºC

Product Images:


Application:
Suitable for medical monitoring equipment

Structure and Dimensions:(Unit: mm)

NO.	Name	Material Specification	QTY.	Remarks
1	Chip	NTC	1	/
2	Probe	Epoxy Resin	1	gray
3	Wire	24AWG/1C OD3.1 Shielded round sheath wire	1	gray
4	Plug	6.3MP-φ6.3*31-50	1	gray

Standard packing (inner packing): 1 pcs/polybag

Operation Notice:

1. Application: Temperature measure ;

2. The current flowing through the NTC is controlled within the Pmax range to avoid the measurement error caused by the self-heating of the component.

3. Avoid excessive heat shock, The hot air blow should beat at least 30mm to the probe in case a heat shrink protection tube need to be attached.

4. Storage Temperature 0ºC~50ºC,30%~80%RH; Avoid a corrosive gas and sunlit environment; After opening the package, it needs to be sealed again.

5. According to the structure of the Glass coating NTC thermistor, when the end-user is installed, to avoid the epoxy head being subjected to too much tensile force and bending force from the lead wire, The lead wire shall be controlled at a bending point or a force point on a lead wire 6mm or less below the sealing head. So as not to hurt the chip, resulting in resistance drifting and even open circuit, especially when the component is heated.