RoHS standard epoxy coated NTC thermistor made-in China
Brief Introduction
RoHS standard epoxy coated NTC thermistor be manufactured from Hefei Jingpu Sensor Technology Co.,Ltd. It's composed of copper clad steel lead wire, soldered NTC chip and epoxy resin. Simple structure, functional and high accuracy. The optional resistance value range from 0.3KΩ to 2000KΩ, and beta value range from 2500K to 4500K. These epoxy coated NTC thermistors be widely apply fro home appliances, automotive, medical equipment, power tool etc.
Feature
• Comply for RoHS standard
• Miniature designed
• Good interchangeable
• Operating temperature range: -40ºC~125ºC
• Low cost, solid state temperature sensor
• High sensitivity to change in temperature
• Suitable for temperature measurement, control and compensation
• Standard resistance tolerances down to ±1%
• Excellent mechanical strength
Application
• home appliance such as referigerator, dryer, HVAC etc.
• Automotive parts
• Medical equipment such as monitors and catheters
• Power tool
Sensor Strcture and Dimensiosn (unit: mm)
Standard packing (inner packing): 500pcs/ polybag, 10-15polybags/carton (46*33.5*35cm)
Operation Notice
1. Application: Temperature measurement and control
2. The current flowing through the NTC is controlled within the max power range to avoid the measurement error caused by the self-heating of the sensor.
3. Avoid excessive heat shock, the hot air blow should beat at least 30mm to the probe in case heat shrink protection tube need to be attached.
4. Storage temperature -10ºC~40ºC, ≤75%RH; Avoid in a corrosive gas and sunlight environment; After opening the package, it needs to be sealed again.
Audited Supplier 
){kind=link}